Day 23 of 30
Diagonals of rectangles
Lessons are AI-drafted and being reviewed and improved over time.
Learning Objective
Find the length of the diagonals of rectangles by splitting each rectangle into two right triangles.
A diagonal is a segment that joins two corners of a shape that are not next to each other. Every rectangle has two diagonals. Each one cuts the rectangle into two matching right triangles. The length and the width of the rectangle are the legs. The diagonal is the hypotenuse. That means the Pythagorean theorem gives the diagonal length right away: d² = length² + width².
Try a rectangle that is 5 inches wide and 12 inches long. Write 5² + 12² = 25 + 144 = 169. Then d = √169 = 13. The diagonal is 13 inches. Now draw the other diagonal. It makes two right triangles with the same legs, 5 and 12, so it is also 13 inches. The two diagonals of any rectangle are always equal in length. They also cut each other in half where they cross.
Diagonals of rectangles show up often in daily life. Screens for TVs, laptops, and phones are sold by the length of their diagonals, not their width. A screen that is 48 inches wide and 27 inches tall has a diagonal of √(2,304 + 729) = √3,033, which is about 55.1 inches. A store would call it a 55-inch screen.
Builders use diagonals to check that a frame is truly rectangular. If a wall frame is 6 feet by 8 feet, its diagonals should each be 10 feet. If one diagonal is 10 feet and the other is 10 feet and 2 inches, the corners are not square. The builder pushes the frame until the diagonals match. This trick works because only a shape with right-angle corners has diagonals that fit the theorem.
A square is a special rectangle. If each side is 5 centimeters, the diagonal is √(25 + 25) = √50. Because 50 is not a perfect square, √50 is irrational. It is about 7.07 centimeters. For any square with side s, the diagonal is s times √2, which is about 1.41 times the side.
You can also work backward. If you know the diagonal and one side, subtract to find the other side. A rectangle with a 26-meter diagonal and a 10-meter side has another side of √(676 - 100) = √576 = 24 meters. Once you know both sides, you can find the area or perimeter too.
Always check that the diagonal is longer than both sides. If it is not, you subtracted when you should have added.
A segment that connects two corners of a polygon that are not next to each other.
A four-sided shape with four right angles; opposite sides are equal.
Diagonals that have the same length, as both diagonals of every rectangle do.
A corner that forms a right angle, which builders check by measuring diagonals.
The length of the diagonal of a rectangular screen, usually given in inches.
Instructions
Materials Needed
- Ruler or tape measure
- Three rectangular objects
- Calculator
- Pencil and paper
Find the length of the diagonals of rectangles that measure 6 cm by 8 cm.
A TV screen is 48 inches wide and 27 inches tall. Screen rectangles are named by their diagonals. Find the diagonal to the nearest tenth of an inch.
A square has sides of 5 m. Squares are rectangles too. Find the exact length of one of its diagonals and round to the nearest hundredth.
A rectangle has a diagonal of 26 m and a width of 10 m. Find its length and its area. Use what you know about diagonals.
A sports field is 100 m long and 60 m wide. A player runs along one of the diagonals. How far does she run, to the nearest tenth of a meter?
A builder measures the diagonals of rectangles in a wall frame that is 9 feet by 12 feet. One diagonal is 15 feet and the other is 15 feet 3 inches. Is the frame square? Explain.
Teaching Tip
Have students draw both diagonals on every rectangle so they see two right triangles and two equal diagonals. Link the square diagonal back to earlier work: √50 is irrational, so the decimal never ends.
Go Deeper
Look up the width and height of a phone or tablet. Compute its diagonal and compare your result with the advertised screen size.
Coming later.